149-1 Series Hand Tightening Aluminum Body Test Plugs With By-Pass Sizes: 1.5" to 12.7"
For other mechanical plugs click here
149-Series Mechanical Hand Tightening Test Plugs Operation & Maintenance Instructions
Mechanical Pipe Plugs Without Integral Restraint Generic Operating Instructions
These plugs come standard with SBR/Natural rubber seals.
Precision Aluminum and Steel And Molded Rubber For Tight Seal Single test plugs for all low pressure sealing requirements.
 |
|
 |
|
Click an Item Number below for the Web Store
| Pipe Diameter | Maximum Pressures* | Total Force |
Area | By-Pass Size |
Shpg Wt lbs |
Item Number |
Unit Price Each |
||||||
| Nominal | Maximum | Relaxed | Maximum | Maximum | |||||||||
| in | mm | in | mm | in | mm | Pipe | Head | in | |||||
| 1.5 | 38 | 2.10 | 53 | 1.50 | 38 | 25 psig | 57 ft | 213 | 1.7 sq in | 3/8" | 1 | 149-101 | US $20.80 |
| 2 | 50 | 2.25 | 57 | 1.80 | 45 | 25 psig | 57 ft | 412 | 3.3 sq in | 3/8" | 1 | 149-102 | US $23.75 |
| 3 | 76 | 3.25 | 82 | 2.75 | 69 | 25 psig | 57 ft | 945 | 7.0 sq in | 3/8" | 2 | 149-103 | US $27.40 |
| 4 | 101 | 4.15 | 105 | 3.75 | 95 | 25 psig | 57 ft | 438 | 12.5 sq in | 1/2" | 2 | 149-104 | US $32.05 |
| 5 | 127 | 5.25 | 133 | 4.65 | 118 | 25 psig | 57 ft | 488 | 19.5 sq in | 1/2" | 3 | 149-105 | US $60.95 |
| 6 | 152 | 6.50 | 165 | 5.80 | 147 | 10 psig | 23 ft | 560 | 28.0 sq in | 1/2" | 4 | 149-106 | US $70.70 |
| 8 | 203 | 8.25 | 209 | 7.85 | 199 | 5 psig | 11 ft | 404 | 50.5 sq in | 1/2" | 8 | 149-108 | US $87.05 |
| 10 | 254 | 10.60 | 269 | 10.15 | 257 | n/a | n/a | n/a | 78.5 sq in | 3/4" | 13 | 149-110 | US $223.10 |
| 12 | 304 | 12.70 | 322 | 12.10 | 307 | n/a | n/a | n/a | 113.0 sq in | 3/4" | 16 | 149-112 | US $249.60 |
Other sizes and configurations available on special order.
IMPORTANT NOTES: Material: Natural rubber. Replacement rubber and other rubber compounds also available.
*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage may cause propertydamage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use a mechanical plug when its failure would cause injury.
Price subject to change without notice
Petersen Terms & Conditions Apply