109 Series Pipeline Cleaning Balls Sizes: 5.87" to 18.25" |
|
Winches, rollers, etc. on our Manhole Testers page Inexpensive method for cleaning new lines prior to line acceptance testing
Equipped with:
|
 |
 |
|
Click an Item Number below for the Web Store
| Nominal Size | Range of Use | Head Pressure (Feet of Head) | Deflated Length | Deflated Diameter | Inflation Valve Thread Size | Eye Bolt | Shpg Wt lbs |
Item Number | Unit Price Each | |
6" - 10" (150 - 250 mm) |
5.87" (149 mm) |
10.25" (260 mm) |
5 (1.5 M) |
8" (203 mm) |
5.62" (142 mm) |
1/4" (1) | 3/8" (2) | 4 | 109-010 | US $195.00 |
10" - 14" (250 - 350 mm) |
8.75" (222 mm) |
14.25" (362 mm) |
5 (1.5 M) |
12.25" (311 mm) |
8.5" (216 mm) |
1/4" (1) | 3/8" (2) | 10 | 109-014 | US $256.00 |
15" - 18" (375 - 450 mm) |
11" (279 mm) |
18.25" (464 mm) |
5 (1.5 M) |
14.75" (375 mm) |
10.75" (273 mm) |
1/4" (1) | 3/8" (2) | 16 | 109-018 | US $308.00 |
**Inflatable Plug Warning: Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 ½ to 2 times the diameter, but even a head of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure would cause injury.
Price subject to change without notice
Petersen Terms & Conditions Apply