143-5 Series Water Line Stub Plugs Sizes: .39" to 5"
For other mechanical plugs click here
143-5-Series Mechanical Hand Tightening Test Plugs Operation & Maintenance Instructions
Mechanical Pipe Plugs Without Integral Restraint Generic Operating Instructions
These plugs have a SBR/Natural rubber o-ring. Works in all types of pipe. Ideal for plugging water line stub-outs. Designed for high pressure applications. Sizes .39" to 1.25" have a wing nut. Sizes 1.5" to 5" have a hex nut.
|
Click an Item Number below for the Web Store
| Pipe Diameter | Maximum Allowable Back Pressures* | Product | Shpg Wt lbs |
Item Number |
Unit Price Each |
|||||||||||
| Nominal | Maximum | Minimum | Air Pressure | Head Pressure | Dia | Length | ||||||||||
| in | mm | in | mm | in | mm | psi | bar | ft | m | in | mm | in | mm | |||
| .39 | 10 | .43 | 11 | .38 | 10 | 185 | 12.8 | 428 | 128 | .38 | 10 | 1.87 | 48 | 1 | 143-5004 | US $4.00 |
| .5 | 13 | .56 | 14 | .5 | 13 | 180 | 12.4 | 415 | 124 | .49 | 12 | 1.87 | 48 | 1 | 143-5005 | US $4.00 |
| .75 | 20 | .87 | 22 | .72 | 18 | 180 | 12.4 | 415 | 124 | .7 | 18 | 2.06 | 52 | 1 | 143-5007 | US $4.00 |
| 1 | 25 | 1.02 | 26 | .86 | 22 | 40 | 2.8 | 92 | 28 | .84 | 21 | 2.18 | 55 | 1 | 143-5010 | US $4.05 |
| 1.25 | 32 | 1.43 | 36 | 1.24 | 32 | 112 | 7.7 | 258 | 77 | 1.22 | 31 | 2.06 | 52 | 1 | 143-5012 | US $5.25 |
| 1.5 | 40 | 1.53 | 39 | 1.43 | 36 | 88 | 6.1 | 203 | 62 | 1.41 | 36 | 1.87 | 48 | 1 | 143-5015 | US $6.30 |
| 2 | 50 | 2.06 | 52 | 1.73 | 44 | 112 | 7.7 | 258 | 77 | 1.71 | 43 | 2.63 | 67 | 1 | 143-5020 | US $9.20 |
| 2.5 | 60 | 2.78 | 71 | 2.3 | 58 | 72 | 4.9 | 166 | 51 | 2.28 | 58 | 2.75 | 70 | 1 | 143-5025 | US $12.70 |
| 3 | 75 | 3.2 | 81 | 2.73 | 69 | 28 | 1.9 | 65 | 19 | 2.71 | 69 | 3.12 | 79 | 2 | 143-5030 | US $14.85 |
| 4 | 100 | 4.5 | 114 | 3.72 | 95 | 24 | 1.7 | 55 | 17 | 3.7 | 94 | 3.12 | 79 | 3 | 143-5040 | US $23.10 |
| 5 | 125 | 5.19 | 132 | 4.8 | 122 | 8 | .6 | 18 | 6 | 4.78 | 121 | 3.25 | 82 | 3 | 143-5050 | US $31.50 |
Material: Natural rubber o-ring.
*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use a mechanical plug when its failure would cause injury.
Price subject to change without notice
Petersen Terms & Conditions Apply


