134 Series Municipal Style Kevlar® Reinforced Rubber Test Plugs Without By-Pass Sizes: 1.60" to 72"
For other inflatable plugs click here For protective sleeves click here Inflation controllers, gauges, hoses, etc. on our accessories page Petersen Inflatable Pipe Plugs Generic Operating Instruction Manual These plugs are molded of *NR-SBR rubber reinforced with Kevlar tire cording. * NR = Isoprene rubber. SBR = Styrene-butadiene rubber. Multi-size pneumatic molded rubber plugs for testing residential and commercial plumbing systems Due to their light weight and short length, these plugs are easy to handle even in large diameter sizes. All plugs are equipped with quick-connect couplings and nipples. Reinforcement sleeves available for heavy duty use. |
Item Number 134-048 |
Click an Item Number below for the Web Store
| Pipe Diameter | Plug Diameter |
Required | **Pipeline |
Valve Type |
Eye Bolt Size |
Deflated | Shpg Wt lbs |
Item Number |
Unit Price Each |
|||||||
| Inflation | Max. Head | |||||||||||||||
| Maximum | Minimum | Length | ||||||||||||||
| in | mm | in | mm | in | mm | psig | ft | m | in | mm | in | mm | ||||
| 2.8 | 72 | 1.6 | 41 | 1.40 | 36 | 36.0 | 34 | 10.4 | R 1/4" | 0.24 | 6 | 7.7 | 195 | 1 | 134-002 | US $139.00 |
| 6 | 153 | 2.80 | 72 | 2.70 | 69 | 36.0 | 34 | 10.4 | R 1/4" | 0.24 | 6 | 13.2 | 335 | 2 | 134-006 | US $194.00 |
| 8 | 203 | 3.63 | 92 | 3.60 | 92 | 36.0 | 34 | 10.4 | R 1/4" | 0.24 | 6 | 21.1 | 536 | 3 | 134-008 | US $277.00 |
| 12 | 305 | 5.63 | 143 | 5.60 | 143 | 36.0 | 34 | 10.4 | R 1/4" | 0.32 | 8 | 22.6 | 575 | 5 | 134-012 | US $403.00 |
| 16 | 406 | 7.50 | 190 | 7.60 | 194 | 36.0 | 34 | 10.4 | R 1/4" | 0.32 | 8 | 25.0 | 635 | 10 | 134-016 | US $488.00 |
| 21 | 533 | 10.75 | 273 | 10.70 | 272 | 36.0 | 34 | 10.4 | R 1/4" | 0.32 | 8 | 26.6 | 676 | 14 | 134-021 | US $680.00 |
| 24 | 610 | 13.00 | 330 | 12.70 | 323 | 36.0 | 34 | 10.4 | R 1/4" | 0.39 | 10 | 34.1 | 867 | 19 | 134-024 | US $756.00 |
| 30 | 762 | 14.00 | 356 | 13.50 | 343 | 36.0 | 34 | 10.4 | R 1/4" | 0.39 | 10 | 42.7 | 1085 | 25 | 134-030 | US $1,400.00 |
| 40 | 1016 | 19.00 | 483 | 18.60 | 473 | 21.6 | 16 | 4.9 | R 1/4" | 0.39 | 10 | 46.7 | 1187 | 39 | 134-040 | US $1,600.00 |
| 48 | 1219 | 23.00 | 584 | 22.60 | 559 | 21.6 | 16 | 4.9 | R 1/4" | 0.39 | 10 | 59.0 | 1499 | 83 | 134-048 | US $2,600.00 |
| 60 | 1524 | 30.00 | 762 | 23.60 | 600 | 14.5 | 13 | 4.0 | R 1/4" | 0.39 | 10 | 90.6 | 2302 | 148 | 134-060 | US $6,200.00 |
| 72 | 1828 | 30.00 | 762 | 23.6 | 600 | 14.5 | 13 | 4.0 | R 1/4' | 0.39 | 10 | 116.5 | 2959 | 231 | 134-072 | US $8,800.00 |
Price subject to change without notice
Petersen Terms & Conditions Apply
**Inflatable Plug Warning: Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 ½ to 2 times the diameter, but even a head of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure would cause injury.