Address your needs quickly by calling 800-926-1926 or 262-692-2416

147 Series Bolt Type High Pressure Test Plugs Sizes: 2.27" to 4.25"

For ID sizes 0.53" - 2.30" click here For ID sizes 4.23" - 6.52" click here For ID sizes 6.78" - 8.53" click here For other mechanical plugs click hereFor Portable Hydrostatic Test Pumps click here

For High Pressure Caps click here

For Safety Gags click here

147-Series High Pressure Test Plugs 1" to 8" Operating Instructions
bolt type test plug

Plugs pictured with optional high pressure caps.

Standard Seal Material: U = Urethane, N = Neoprene

High Pressure Test Plugs use the test pressure to help seal more securely against the pipe's inner diameter

Typical Applications: Force and water main, lift stations, nuclear cooling lines, fire protection lines, special plant situations, irrigation supply lines, and many other projects.

Click an Item Number below for the Web Store

High Pressure Test Plugs 2.27" to 4.25" ID Sizes
Nominal Pipe By-Pass
Size (1)
NPT		 Pipe I.D. Size Range *Maximum Test Std. Seal
Mat'l
(4)

Shaft

Qty

Installation

Depth

Overall Length Shpg
Wt
lbs		 Item
Number

Unit

Price
Each
Maximum Minimum Pressure (2)(3)
Size Sched in mm in mm psig bar in mm in mm
2.50 80/XS 3/8M 2.45 62.2

2.27

 57.7 5,900 410 U 1 2.88 73.0 7 177.8 4 147-0025-P80 US $393.00
3.00 XXS 3/8M 2.45 62.2 2.27 57.7 11,100 770 U 1 2.88 73.0 7 177.8 4 147-0030-PXXS US $395.00
2.50 40 / STD 1/2M 2.54 64.5 2.44 62.0 4,200 290 U 1 3 76.2 9 227 6 147-0025-P40 US $393.00
2.50 10 1/2M 2.74 69.6 2.60 66.0 2,400 170 U 1 3.31 84.1 9 227 7 147-0025-P10 US $623.00
3.00 160 1/2M 2.74 69.6 2.60 66.0 7,800 540 U 1 3.31 84.1 9 227 7

147-0030-P160

 US $623.00
2.50 5 1/2M 2.78 70.6 2.68 68.1 1,600 110 U 1 3 76.2 9 227 7 147-0025-P5 US $623.00
3.50 XXS 1/2M 2.89 73.4 2.70 68.6 10,200 700 U 1 3.50 88.9 9 227 8 147-0035-PXXS US $623.00
3.00 80/XS 1/2M 2.98 75.7 2.87 72.9 5,200 360 U 1 3.19 81.0 9 227 8 147-0030-P80 US $471.00
3.00 40 / STD 1/2M 3.14 79.8 3.04 77.2 3,700 260 U 1 3.19 81.0 9 227 8 147-0030-P40 US $446.00
4.00 XXS 1/2M 3.32 84.3 3.12 79.2 9,500 660 U 1 3.81 96.8 9 227 9 147-0040-PXXS US $744.00
3.00 10 1/2M 3.34 84.8 3.23 82.0 2,000 140 U 1 3.19 81.0 9 227 9 147-0030-P10 US $744.00
3.00 5 1/2M 3.41 86.6 3.30 83.8 1,400 100 U 1 3.19 81.0 9 227 9 147-0030-P5 US $744.00
3.50 80/XS 1/2M 3.44 87.4 3.33 84.6 4,800 330 U 1 3.31 84.1 9 227 9 147-0035-P80 US $744.00
4.00 160 1/2M 3.57 90.7 3.41 86.6 7,400 510 U 1 3.69 93.7 9 227 10 147-0040-P160 US $744.00
3.50 40 / STD 1/2M 3.63 92.2 3.52 89.4 3,300 230 U 1 3.31 84.1 9 227 10 147-0035-P40 US $744.00
4.00 120 1/2M 3.74 95.0 3.60 91.4 6,000 410 U 1 3.63 92.1 9 227 11 147-0040-P120 US $744.00
3.50 10 1/2M 3.84 97.5 3.73 94.7 1,700 120 U 1 3.31 84.1 9 227 11 147-0035-P10 US $744.00
3.50 5 1/2M 3.91 99.3 3.80 96.5 1,200 80 U 1 3.56 90.5 9 227 12 147-0035-P5 US $678.00
4.00 80/XS 1/2M 3.91 99.3 3.80 96.5 4,500 310 U 1 3.56 90.5 9 227 12 147-0040-P80 US $678.00
4.00 40 / STD 1/2M 4.11 104.4 4.00 101.6 3,100 210 U 1 3.63 92.1 9 227 12 147-0040-P40 US $678.00
5.00 XXS 1/2M 4.25 108.0 4.03 102.4 8,500 590 U 1 4.31 109.5 9 227 14 147-0050-PXXS US $948.00

Other sizes and seal material available

IMPORTANT:

  1. M = Male NPT, F = Female NPT
  2. NEVER use a test pressure greater than the weakest component in the system can handle. Test Pressure specified in table is equivalent to 80% of the pressure that will yield ASTM A106 Grade B pipe. The test pressure for higher and lower strength pipes will differ proportionally. The maximum test pressure for higher strength pipe must never exceed the highest test pressure listed for that pipe O.D.
  3. Sizes that do not have a test pressure listed differ from standard pipe sizes. These plug sizes are normally used to test tubing. For use of these plug sizes in tubing with a minimum yield strength of 35ksi, the maximum test pressure is estimated by the test pressure listed for the equivalent or next larger pipe O.D. with the equivalent or next thinner wall thickness. The test pressure for higher and lower strength tubes will differ proportionally. The maximum test pressure for higher strength tubes must never exceed the highest test pressure listed for the equivalent or next larger pipe size. NEVER use a test pressure greater than the weakest component in the system can safely handle.
  4. Standard Seal Material: U = Urethane, N = Neoprene

*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system.  NEVER use a mechanical plug when its failure would cause injury.

Specifications subject to change without notice

Price subject to change without notice

Petersen Terms & Conditions Apply