Petersen Products Company: Multi-Flex™ Line Stop Plugs 3 1/2" to 60"

129 Series High Pressure Multi-Flex™ High Pressure Line Stop Plugs Sizes: 2" to 96"

Click here for Hot Tap Plug Insertion Assembly		For other inflatable plugs click here
For other hot tap insertion plugs click here		Inflation controllers, gauges, hoses, etc. on our accessories page

Petersen Inflatable Pipe Plugs Generic Operating Instruction Manual
line stop

129-Series Multi-Flex™ Line Stop Plug Hot Tap Installation Instructions

Specifications

These plugs are generally made with a Nylon reinforced Polyurethane seal.

Compact Diameter Allows Insertion Through a Small Hot Tap in a Pressurized Pipeline

Petersen Inflatable Multi-Flex Pipe Plug Insertion System installs a plug into a pressurized pipeline without removing pressure. This allows for maintenance of pipelines without reducing pressure or emptying the pipeline. There are two Petersen Hot Tap Insertion Systems.

The 128 Series Multi-Flex Plug requires a smaller hot tap size and is installed down stream of the hot tap. This allows the plug launching system to also bypass flow upstream of the plug. The 129 Series Plug can be built for much higher pressures than the 128 Series but requires a somewhat larger hot tap and inflates immediately below the hot tap. When the project is complete a Completion Valve may be installed and the tapping valve removed.

Petersen can provide complete hot tap plugging systems and on-site technical support. Email us at sales@petersen.cc or call 1-800-926-1926 for all your pipeline plugging requirements.

Hot Tap Insertion, Flange Inflation, Higher Pressure

End inflation port also available

Hot Tapping Assembly

Click here for detailed drawing

Other pressures, sizes, and
configurations available

deflated line stop plug

Plug deflated for insertion
through a hot tap

Click an Item Number below for the Web Store

Hot Tap Plugs (Other Sizes and Pressures Available)

Plug Diameter				Maximum		**Pipeline		Inflation Flange	Inflated Seal Length		Shpg Wt lbs	Item Number	Unit Price Each
Maximum		Hot Tap		Inflation		Max. Head			Inflated Seal Length
in	mm	in	mm	psig	bar	ft	m		in	mm
2	50	1.88	48	160	11	184	56	1/4" mnpt	4	102	2	129-002	US $996.00
3	76	2.75	70	160	11	184	56	1/4" mnpt	6	152	3	129-003	US $996.00
4	102	3.75	95	160	11	184	56	1/2" mnpt	10	254	4	129-004	US $996.00
6	152	3.88	99	160	11	184	56	1/2" mnpt	10	254	5	129-006	US $1,134.00
8	203	4.88	124	160	11	184	56	1/2" mnpt	12	305	8	129-008	US $1,254.00
10	254	5.88	149	120	8.3	138	42	1/2" mnpt	15	381	11	129-010	US $1,440.00
12	305	7.75	197	120	8.3	138	42	1" x 150 lb	18	457	20	129-012	US $1,671.00
15	381	7.75	197	100	6.9	115	35	1" x 150 lb	22	558	25	129-015	US $2,172.00
16	406	9.75	248	100	6.9	115	35	1 1/4" x 300 lb	24	610	28	129-016	US $2,229.00
18	457	9.75	248	100	6.9	115	35	1 1/4" x 300 lb	27	685	33	129-018	US $2,736.00
20	508	9.75	248	80	5.5	92	28	1 1/4" x 300 lb	30	762	35	129-020	US $3,600.00
24	610	11.75	298	80	5.5	92	28	2" x 300 lb	36	914	37	129-024	US $4,089.00
30	762	11.75	298	60	4.1	70	21	2" x 300 lb	45	1143	53	129-030	US $6,741.00
33	838	11.75	298	50	3.4	58	17	2" x 300 lb	49	1244	56	129-033	US $7,107.00
36	914	11.75	298	50	3.4	58	17	2" x 300 lb	54	1372	70	129-036	US $7,467.00
42	1067	15.75	400	40	2.7	46	14	4" x 300 lb	63	1600	83	129-042	US $10,854.00
48	1219	15.75	400	30	2.0	35	10.5	4" x 300 lb	72	1829	109	129-048	US $12,456.00
54	1372	15.75	400	30	2.0	35	10.5	4" x 300 lb	81	2057	144	129-054	US $15,213.00
60	1524	17.75	451	20	1.3	23	7	4" x 300 lb	90	2286	148	129-060	US $18,804.00
66	1676	19.75	502	20	1.3	23	7	4" x 300 lb	99	2514	165	129-066	US $22,445.00
72	1829	23.75	603	20	1.3	23	7	6" x 300 lb	108	2743	180	129-072	US $29,258.00
84	2133	23.75	603	15	1.0	17	5.3	6" x 300 lb	126	3200	210	129-084	US $38,077.00
96	2438	29.00	737	15	1.0	17	5.3	6" x 300 lb	144	3657	240	129-096	US $46,895.00

**Inflatable Plug Warning: Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 ½ to 2 times the diameter, but even a head of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure would cause injury.

Price subject to change without notice

Petersen Terms & Conditions Apply

Products covered by one or more of the following patents: 4,565,222; 5,353,842; 5,901,752; 6,446,669; 6,568,429; 6,899,138 and other applications pending.