HOME

LOGIN

VIEW CART

For a quote or information: Email, call 800-926-1926 (262-692-2416) or click on a product below, then the item number for information or to order online.

161-Series High Pressure Flat Form Bags Sizes 22" to 36"

For other lifting air bags click here 161-Series High Pressure Lifting Air Bags Operating Instructions Made of Kevlar® reinforced *NR-SBR rubber compound. * NR = Isoprene rubber, natural. SBR = Styrene-butadiene rubber. The pneumatic high pressure flat form heavy lifting air bags are reinforced with Kevlar® cord for heavy duty, low profile heavy lifting, emergency rescue, HAZMAT management or industrial use. The Flat Form design bags eliminate the need for complicated height/weight computation graphs and uncertain lifting height calculations. Simply stated, a 34.1 ton bag will lift 34.1 tons to the specified height (see table). Flat Form bags safely link together when stacked, eliminating slipping or violent ejection. Maximum of three bags can be safely stacked. Flat Form bags retain their flat profile, eliminating rolling and shifting. Heavy duty design and Kevlar reinforcing insure long life.

Click an Item Number below for the Web Store Flat Form Lifting Bags Size Thickness in Lift Height in Maximum Load Inflation Pressure psi Test Pressure psi Burst Pressure psi Shpg Wt lbs Item Number Unit Price Each 22"x22" 1.1 6.7 7.7 tons 116 152 +218 18 161-02222 US $1,071.00 24"x24" 1.1 6.7 12 tons 116 152 +218 23 161-02424 US $1,415.00 31"x31" 1.1 8 20 tons 116 152 +218 38 161-03131 US $2,347.00 36"x36" 1.1 8 35 tons 116 152 +218 52 161-03636 US $3,518.00

Flat Bag Connectors Shpg Wt lbs Item Number Unit Price Set 2-bag attchment set (4 per set) 1 162-1610-02 US $105.00 3-bag attachment set (4 per set) 1 162-1610-03 US $136.00

Other Available Controllers:

Regulators:

Safety Hoses:

Other length and fitting configurations also available.

*Inflatable Plug Warning: Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 ½ to 2 times the diameter, but even a head of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage may cause property damage or injury.  NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure would cause injury.

Price subject to change without notice

Petersen Terms & Conditions Apply