Address your needs quickly by calling 800-926-1926 or 262-692-2416

143-0 Series Hand Tightening Nylon Test & Cleanout Plugs Sizes: 1 1/2" to 4"

For other mechanical plugs click here

Economical plugs for many applications

Mechanical Test Plug For Air Tests

  • Employs a hollow, bored bolt stem, and threaded brass air filler valve.
  • Simply insert, tighten, and inflate. The non-slip shoulder prevents the gasket from spinning.
  • A bored bolt stem and integral brass air valve make the pneumatic test plug an easy alternative to standard water head pressure tests.

Click an Item Number below for the Web Store

Pipe Diameter Relative Blowout Ratings* Shpg
Wt
lbs		 Item
Number		 Unit
Price
Each
Maximum Minimum 72¡F 15¡F 0¡F
in mm in mm psig psig psig
1.820 46 1.550 39 65 55 42 1 143-001-P US $19.75
2.100 53 1.865 47 65 25 10 1 143-002-P US $20.10
3.135 79 2.860 72 45 11 7 1 143-003-P US $21.05
4.150 105 3.875 98 42 10 8 1 143-004-P US $21.95
Mechanical Test Plug For Air Tests

Mechanical Test Plug For Head Tests

Back to front wedge design prevents blowouts at high and low temperatures.

Provides a leak-free seal at seven times the psi of other mechanical test plugs.

"Non-slip shoulder for fast, easy installations."

Designed with only four corrosion proof components:

  • Polypro wingnut
  • Nylon top plate
  • Soft PVC gasket
  • Nylon base/stem for simplicity and strength.

Click an Item Number below for the Web Store

Pipe Diameter Relative Blowout Ratings* Shpg
Wt
lbs		 Item
Number		 Unit
Price
Each
Maximum Minimum 72¡F 15¡F 0¡F
in mm in mm psig psig psig
1.820 46 1.550 39 65 55 42 1 143-001 US $3.75
2.100 53 1.865 47 65 25 10 1 143-002 US $4.10
3.135 79 2.860 72 45 11 7 1 143-003 US $5.75
4.150 105 3.875 98 42 10 8 1 143-004 US $7.15
Mechanical Test Plug For Head Tests

Mechanical Test Plug For Cleanouts

"Seals 1-1/2" - 4" female cleanout threads."

Ideal for use on damaged cleanout openings or on damaged or deteriorated threads.

Soft PVC gasket creates an air-tight seal first behind the threads then forms into them.

Click an Item Number below for the Web Store

Pipe Diameter Shpg
Wt
lbs		 Item
Number		 Unit
Price
Each
Maximum Minimum
in mm in mm
1.830 46 1.615 41 1 143-001-C US $6.20
2.285 58 1.890 48 1 143-002-C US $6.70
4.260 108 3.875 98 1 143-003-C US $9.05
4.315 109 4.050 102 1 143-004-C US $10.70
Mechanical Test Plug For Cleanouts
 

Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system.  NEVER use a mechanical plug when its failure would cause injury.

Price subject to change without notice

Petersen Terms & Conditions Apply