Address your needs quickly by calling 800-926-1926 or 262-692-2416

151 Series High Lift Flange Weld Test Plugs Sizes: 3/4" to 24"

For other mechanical plugs click here

For Portable Hydrostatic Test Pumps click here

151-Series High Lift Flange Test & Welding Plugs Operating Instructions for Sizes 3/4" to 8"

151-Series High Lift Flange Test & Welding Plugs Operating Instructions for Sizes 10" to 24"

Specifications for 3/4" to 8"

Specifications for 10" to 16"

Specifications for 18" to 24"

 high lift weld flange

These plugs have a Urethane seal.

Steam, Sniff, Purge, Weld and Test - All With The Same Plug.  For quickly isolating and hydrostatically testing the weld joint of any welded flange-to-pipe connection.

The new and approved "High Lift" seal design permits greater seal to pipe clearance and higher seal expansion.  This means the plug will easily pass over weld penetration.  Grinding out deep root penetrations is eliminated.

This plug will reduce the expense, downtime delays, and waste disposal problems associated with conventional flange-to-pipe weld testing.  Our High Lift Flange Weld Test Plug lets you monitor downstream conditions, isolate and purge the weld area, perform the weld, and hydro test weld joint to ANSI B16.5 requirements using only one tool.  No blind flanging upstream, no vacuum truck for evacuating the line, and no X-raying.  Just a simple, rock-solid tool that saves time and money every time you use it.  Each test requires a minimum amount of water and there's no need to fill the entire line.  You'll use less water and minimize your environmental liabilities.

  • Fast, easy installation, and testing.
  • Segmented compression tube allows adjustment of seal installation depth.
  • Faster pipe repairs and retrofits.
  • Improved Seal-to-Pipe Clearance: Plug can be easily installed and removed, even where there is severe weld protrusion.
  • Low water requirements resulting in less waste water.
  • A minimum of 1.5:1 safety factor.
  • Rugged, heavy-duty construction.
  • Versatile: Seal and washer sets easily change to accommodate different pipe schedules.
  • Ported Center Shaft: Permits monitoring of downstream pressure of inert gas rejection.
  • Flange classes 150 - 600 lbs.
  • Seal Materials: Urethane Standard.

weld flange plugs

Click an Item Number below for the Web Store

Flange

Pipe

Sched

Seal

to Pipe Clearance

Vent & Fill

Port Size

L1-A Welding

Plug

Application

L1-B Test

Plug

Application

L2 Max L3 L4 Shpg
Wt
lbs		 Item
Number

Unit

Price
Each

Size

in

Class

lb

 in mm in npt in mm in mm in mm in mm in mm
3/4 DN20
 150 160 .05 1.3 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P160 US $773.00
150 80 .07 1.8   1/8 F

12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P80 US $773.00
150 40 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P40 US $773.00
150 10 .07 1.8 1/8F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 8 151-1007-P10 US $773.00
300 160 .05 1.3 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P160 US $801.00
300 80 .07 1.8   1/8 F

12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P80 US $801.00
300 40 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P40 US $801.00
300 10 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-3007-P10 US $801.00
600 160 .05 1.3 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P160 US $821.00
600 80 .07 1.8   1/8 F

12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P80 US $821.00
600 40 .07 1.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P40 US $821.00
  600 10 .07 1.8 1/8 F 12 3048 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-6007-P10 US $801.00
1 DN25 150 XXS .04 1.0 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-PXXS US $779.00
150 160 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P160 US $779.00
150 80 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P80 US $779.00
150 40 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P40 US $779.00
150 10 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 9 151-1010-P10 US $779.00
300 XXS .04 1.0 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-PXXS US $804.00
300 160 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P160 US $804.00
300 80 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P80 US $804.00
300 40 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P40 US $804.00
300 10 .11 2.8 1/8 F 12 304.8

3

 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-3010-P10 US $804.00
600 XXS .04 1.0 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-PXXS US $833.00
600 160 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P160 US $833.00
600 80 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P80 US $833.00
600 40 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P40 US $833.00
  600 10 .11 2.8 1/8 F 12 304.8 3 76.2 14 1/4 362.0 1 1/4 31.8 24 11/16 627.1 11 151-6010-P10 US $833.00
1 1/4 DN32
 150 160 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P160 US $954.00
150 80 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P80 US $954.00
150 40 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P40 US $954.00
150 10 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 10 151-1012-P10 US $954.00
300 160 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P160 US $975.00
300 80 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P80 US $975.00
300 40 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P40 US $975.00
300 10 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-3012-P10 US $975.00
600 160 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P160 US $1,022.00
600 80 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P80 US $1,022.00
600 40 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P40 US $1,022.00
  600 10 .13 3.3 1/8 F 12 304.8 3 3/8 85.7 15 381.2 1 5/8 41.3 20 3/8 517.5 13 151-6012-P10 US $1,022.00
1 1/2 DN40 150 160 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P160 US $993.00
150 80 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P80 US $993.00
150 40 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P40 US $993.00
150 10 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 11 151-1015-P10 US $993.00
300 160 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P160 US $1,013.00
300 80 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P80 US $1,013.00
300 40 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P40 US $1,013.00
300 10 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 15 151-3015-P10 US $1,013.00
600 160 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P160 US $1,043.00
600 80 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P80 US $1,043.00
600 40 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P40 US $1,043.00
  600 10 .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 16 151-6015-P10 US $1,043.00
2 DN50

150

 xxs .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-PXXS US $1,052.00
150 160 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P160 US $1,052.00
150 80 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P80 US $1,052.00
150 40 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P40 US $1,052.00
150 10 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 14 151-1020-P10 US $1,052.00
300 xxs .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-PXXS US $1,088.00
300 160 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P160 US $1,088.00
300 80 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P80 US $1,088.00
300 40 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P40 US $1,088.00
300 10 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 18 151-3020-P10 US $1,088.00
600 xxs .17 4.3 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-PXXS US $1,130.00
600 160 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P160 US $1,130.00
600 80 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P80 US $1,130.00
600 40 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P40 US $1,130.00
  600 10 .25 6.4 1/4 F 12 304.8 3 3/8 85.7 15 1/8 384.2 1 3/4 44.5 20 3/8 517.5 20 151-6020-P10 US $1,130.00
2 1/2 DN65 150 160 .13 3.3 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P160 US $1,326.00
150 80 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P80 US $1,326.00
150 40 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P40 US $1,326.00
150 10 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 20 151-1025-P10 US $1,326.00
300 160 .13 3.3 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P160 US $1,486.00
300 80 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P80 US $1,486.00
300 40 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P40 US $1,486.00
300 10 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 25 151-3025-P10 US $1,486.00
600 160 .13 3.3 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P160 US $1,496.00
600 80 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P80 US $1,496.00
600 40 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P40 US $1,496.00
  600 10 .25 6.4 1/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 28 151-6025-P10 US $1,496.00
3 DN80 150 xxs .23 5.8 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-PXXS US $1,430.00
150 160 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P160 US $1,430.00
150 80 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P80 US $1,430.00
150 40 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P40 US $1,430.00
150 10 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 26 151-1030-P10 US $1,430.00
300 xxs .23 5.8 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-PXXS US $1,475.00
300 160 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P160 US $1,475.00
300 80 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P80 US $1,475.00
300 40 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P40 US $1,475.00
300 10 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 33 151-3030-P10 US $1,475.00
600 xxs .23 5.8 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-PXXS US $1,563.00
600 160 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P160 US $1,563.00
600 80 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P80 US $1,563.00
600 40 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P40 US $1,563.00
  600 10 .38 9.7 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 568.3 37 151-6030-P10 US $1,563.00
4 DN100 150 xxs .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-PXXS US $1,610.00
150 160 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P160 US $1,610.00
150 120 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P120 US $1,610.00
150 80 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P80 US $1,610.00
150 40 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P40 US $1,610.00
150 10 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 32 151-1040-P10 US $1,610.00
300 xxs .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-PXXS US $1,686.00
300 160 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P160 US $1,686.00
300 120 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P120 US $1,686.00
300 80 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P80 US $1,686.00
300 40 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P40 US $1,686.00
300 10 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 43 151-3040-P10 US $1,686.00
600 xxs .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-PXXS US $1,893.00
600 160 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P160 US $1,893.00
600 120 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P120 US $1,893.00
600 80 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P80 US $1,893.00
600 40 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P40 US $1,893.00
  600 10 .44 11.2 3/4 F 12 304.8 6 152.4 17 1/8 435.0 2 50.8 22 3/8 538.3 56 151-6040-P10 US $1,893.00
6 DN150 150 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P160 US $3,045.00
150 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P120 US $3,045.00
150 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P80 US $3,045.00
150 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P40 US $3,045.00
150 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 70 151-1060-P10 US $3,045.00
300 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P160 US $3,197.00
300 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P120 US $3,197.00
300 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P80 US $3,197.00
300 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P40 US $3,197.00
300 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 91 151-3060-P10 US $3,197.00
600 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P160 US $3,690.00
600 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P120 US $3,690.00
600 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P80 US $3,690.00
600 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P40 US $3,690.00
  600 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 1/2 520.7 3 3/4 95.3 28 711.2 129 151-6060-P10 US $3,690.00
8 DN200 150 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P160 US $3,575.00
150 xxs .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-PXXS US $3,575.00
150 140 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P140 US $3,575.00
150 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P120 US $3,575.00
150 100 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P100 US $3,575.00
150 60 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P60 US $3,575.00
150 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P80 US $3,575.00
150 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P40 US $3,575.00
150 20 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P20 US $3,575.00
150 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 146 151-1080-P10 US $3,575.00
300 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P160 US $3,651.00
300 xxs .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-PXXS US $3,651.00
300 140 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P140 US $3,651.00
300 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P120 US $3,651.00
300 100 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P100 US $3,651.00
300 60 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P60 US $3,651.00
300 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P80 US $3,651.00
300 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P40 US $3,651.00
300 20 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P20 US $3,651.00
300 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 178 151-3080-P10 US $3,651.00
600 160 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P160 US $4,841.00
600 xxs .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-PXXS US $4,841.00
600 140 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P140 US $4,841.00
600 120 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P120 US $4,841.00
600 100 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P100 US $4,841.00
600 60 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P60 US $4,841.00
600 80 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P80 US $4,841.00
600 40 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P40 US $4,841.00
600 20 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P20 US $4,841.00
  600 10 .50 12.7 3/4 F 12 304.8 6 152.4 20 3/4 527.1 4 101.6 28 711.2 238 151-6080-P10 US $4,841.00
weld flange plug
Flange

Pipe

Sched

Bottom

Washer

OD*

Plug

OD*

Vent & Fill Port

in NPT

Shaft

Qty

Dim to Seal

Overall Length

Seal/

Washer

Length

 Seal O-Ring

Dash

No.**

 Shpg
Wt
lbs		 Item
Number

Unit

Price
Each

Size

in

Class

lb
in
mm
in
mm
in
mm
in
mm
in
mm
10 DN250 150 100 (4) 8.81 223.8 8.81 223.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 3 1/2 88.9 -445 175 US $5,178.00
150
80
8.81
223.8
9.06
230.1
3/4 F
4
12 1/2
317.5
20 11/16
525.5
4
101.6
-446
175
 US $5,178.00
150 60/xs 8.81 223.8 9.25 235.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -446 175 US $5,178.00
150
40/std
8.81
223.8
9.52
241.8
3/4 F
4
12 1/2
317.5
20 11/16
525.5
4
101.6
-447
175
 US $5,178.00
150 30 8.81 223.8 9.64 244.9 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -447 175 US $5,178.00
150 20 8.81 223.8 9.75 247.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -447 175 US $5,178.00
150 10 8.81 223.8 9.92 252.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 175 US $5,178.00
150 5 8.81 223.8 9.98 253.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 175 US $5,178.00

300

 100 (4) 8.81 223.8 8.81 223.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 3 1/2 88.9 -445 230 US $5,427.00
300 80
8.81
223.8
9.06
230.1
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-446
230
 US $5,427.00
300 60/xs 8.81 223.8 9.25 235.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -446 230 US $5,427.00
300 40/std
8.81
223.8
9.52
241.8
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-447
230
 US $5,427.00
300 30 8.81 223.8 9.64 244.9 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -447 230 US $5,427.00
300 20 8.81 223.8 9.75 247.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -447 230 US $5,427.00
300 10 8.81 223.8 9.92 252.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 230 Not available
300 5 8.81 223.8 9.98 253.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 230 US $5,427.00
600 100 (4) 8.81 223.8 8.81 223.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 3 1/2 88.9 -445 339 US $6,285.00
600 80
8.81
223.8
9.06
230.1
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-446
339
 US $6,285.00
600 60/xs 8.81 223.8 9.25 235.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -446 339 US $6,285.00
600 40/std
8.81
223.8
9.52
241.8
3/4 F
4
12 1/2
317.5
20 11/16
525.5
4
101.6
-447
339
 US $6,285.00
600 30 8.81 223.8 9.64 244.9 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -447 339 US $6,285.00
600 20 8.81 223.8 9.75 247.7
3/4 F
4 12 1/2 317.5 20 11/16 525.5 4 101.6 -447 339 US $6,285.00
600 10 8.81 223.8 9.92 252.0 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 339 US $6,285.00
  600 5 8.81 223.8 9.98 253.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -448 339 US $6,285.00
12 DN300
150
80 (4)
10.87
276.1
10.87
276.1
 3/4 F
4
12 1/2
317.5
20 11/16
525.5
3 1/2
88.9
-449
212
 US $6,105.00
150 60 10.87 276.1 11.13 282.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 212 US $6,105.00
150 xs 10.87 276.1 11.25 285.8 3/4 F 4
12 1/2
317.5
20 11/16
525.5 4 101.6 -450 212 US $6,105.00
150
40/std
10.87
276.1
11.50
292.1
 3/4 F
4
 12 1/2 317.5 20 11/16
525.5
4
101.6
-451
212
 US $6,105.00
150 30 10.87 276.1 11.59 294.4 3/4 F 4
12 1/2
317.5
20 11/16
525.5 4 101.6 -451 212 US $6,105.00
150 20 10.87 276.1 11.75 298.5 3/4 F 4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -451 212 US $6,105.00
150 10/5 10.87 276.1 11.94 303.3 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -452 212 US $6,105.00
300
80 (4)
10.87
276.1
10.87
276.1
 3/4 F 4 12 1/2 317.5 20 11/16
525.5
3 1/2
88.9
-449
332
 US $6,671.00
300 60 10.87 276.1 11.13 282.7 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 332 US $6,671.00
300 xs 10.87 276.1 11.25 285.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 332 US $6,671.00
300
40/std
10.87
276.1
11.50
292.1
 3/4 F 4
12 1/2
317.5
20 11/16
525.5
4
101.6
-451
332
 US $6,671.00
300 30 10.87 276.1 11.59 294.4 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -451 332 US $6,671.00
300 20 10.87 276.1 11.75 298.5 3/4 F 4
12 1/2
317.5
20 11/16
525.5 4 101.6 -451 332 US $6,671.00
300 10/5 10.87 276.1 11.94 303.3
3/4 F
4

12 1/2

 317.5 20 11/16 525.5 4 101.6 -452 332 US $6,671.00
600
80 (4)
10.87
276.1
10.87
276.1
 3/4 F 4 12 1/2 317.5 20 11/16
525.5
3 1/2
88.9
-449
444
 US $7,529.00
600 60 10.87 276.1 11.13 282.7
3/4 F
4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 444 US $7,529.00
600 xs 10.87 276.1 11.25 285.8 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -450 444 US $7,529.00
600
40/std
10.87
276.1
11.50
292.1
 3/4 F 4 12 1/2 317.5 20 11/16
525.5
4
101.6
-451
444
 US $7,529.00
600 30 10.87 276.1 11.59 294.4 3/4 F 4
12 1/2
317.5 20 11/16 525.5 4 101.6 -451 444 US $7,529.00
600 20 10.87 276.1 11.75 298.5 3/4 F 4 12 1/2 317.5 20 11/16 525.5 4 101.6 -451 444 US $7,529.00
  600 10/5 10.87 276.1 11.94 303.3 3/4 F 4
12 1/2
317.5 20 11/16 525.5 4 101.6 -452 444 US $7,529.00
14 DN350 150 140 (4) 11.00 279.4 11.00 279.4 3/4 F 6

12 1/2

 317.5 20 15/16 531.8 3 3/4 95.3 N/A 296 US $8,633.00
150 120 11.00 279.4 11.31 287.3 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1

N/A

 296 US $8,633.00
150 100 11.00 279.4 11.62 295.1 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296 US $8,633.00
150
80
11.00
279.4
12.00
304.8
 3/4 F
6
 12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
296
 US $8,633.00
150 60 11.00 279.4 12.31 312.7 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296 US $8,633.00
150 xs 11.00 279.4 12.50 317.5 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296 US $8,633.00
150
40
11.00
279.4
12.62
320.5
 3/4 F
6
12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
296
 US $8,633.00
150 30/std 11.00 279.4 12.75 323.9 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296 US $8,633.00
150 20 11.00 279.4 12.88 327.2 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 296 US $8,633.00
150 10/10s/5 11.00 279.4 13.12 333.2 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 296 US $8,633.00
300 140 (4) 11.00 279.4 11.00 279.4
3/4 F
6 12 1/2 317.5 20 15/16 531.8 3 3/4 95.3 N/A 386 US $9,510.00
300 120 11.00 279.4 11.31 287.3 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1

N/A

 386 US $9,510.00
300 100 11.00 279.4 11.62 295.1
3/4 F
6

12 1/2

 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386 US $9,510.00
300
80
11.00
279.4
12.00
304.8
 3/4 F 6 12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
386
 US $9,510.00
300 60 11.00 279.4 12.31 312.7 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386 US $9,510.00
300 xs 11.00 279.4 12.50 317.5 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386 US $9,510.00
300
40
11.00
279.4
12.62
320.5
 3/4 F 6 12 1/2
317.5
20 15/16
531.8
4 3/8
111.1
N/A
386
 US $9,510.00
300 30/std 11.00 279.4 12.75 323.9 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 386 US $9,510.00
300 20 11.00 279.4 12.88 327.2 3/4 F 6 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 386 US $9,510.00
  300 10/10s/5 11.00 279.4 13.12 333.2 3/4 F 6
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 386 US $9,510.00
16 DN400 150 120 (4) 13.06 331.7 13.06 331.7
3/4 F
8 12 1/2 317.5 20 15/16 531.8 3 3/4 95.3 N/A 397 US $10,643.00
150 100 13.06 331.7 13.44 341.4 3/4 F 8
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 397 US $10,643.00
150
80
13.06
331.7
13.81
350.8
 3/4 F
8

12 1/2

 317.5 20 15/16
531.8
4 3/8
111.1
N/A
397
 US $10,643.00
150 60 13.06 331.7 14.19 360.4 3/4 F 8 12 1/2
317.5
20 15/16
531.8 4 3/8 111.1 N/A 397 US $10,643.00
150
40/xs
13.06
331.7
14.5
368.3
 3/4 F
8
 12 1/2 317.5 20 15/16
531.8
4 3/8
111.1
N/A
397
 US $10,643.00
150 30/std 13.06 331.7 14.75 374.7 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 397 US $10,643.00
150 20 13.06 331.7 14.88 378.0 3/4 F 8 12 1/2
317.5
20 15/16
531.8 4 3/8 111.1 N/A 397 US $10,643.00
150 10 13.06 331.7 15.12 384.0 3/4 F 8
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 397 US $10,643.00
300 120 (4) 13.06 331.7 13.06 331.7 3/4 F 8 12 1/2 317.5 20 15/16 531.8 3 3/4 95.3 N/A 528 US $11,550.00
300 100 13.06 331.7 13.44 341.4 3/4 F 8
12 1/2
317.5 20 15/16 531.8 4 3/8 111.1 N/A 528 US $11,550.00
300
80
13.06
331.7
13.81
350.8
 3/4 F
8

12 1/2

 317.5 20 15/16
531.8
4 3/8
111.1
N/A
528
 US $11,550.00
300 60 13.06 331.7 14.19 360.4 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 528 US $11,550.00
300
40/xs
13.06
331.7
14.5
368.3
 3/4 F
8
 12 1/2 317.5 20 15/16
531.8
4 3/8
111.1
N/A
528
 US $11,550.00
300 30/std 13.06 331.7 14.75 374.7 3/4 F 8 12 1/2
317.5
20 15/16
531.8 4 3/8 111.1 N/A 528 US $11,550.00
300 20 13.06 331.7 14.88 378.0 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 528 US $11,550.00
  300 10 13.06 331.7 15.12 384.0 3/4 F 8 12 1/2 317.5 20 15/16 531.8 4 3/8 111.1 N/A 528 US $11,550.00
weld flange plug
Flange

Pipe

Sched

Bottom

Washer

OD*

Plug

OD*

Vent & Fill Port

in NPT

Shaft

Qty

Dim to Seal

Overall Length

Seal/ Washer

Length

 Seal

O-Ring

Dash

No.**

 Shpg
Wt
lbs		 Item
Number

Unit

Price
Each

Size

in

Class

lb
in
mm
in
mm
in
mm
in
mm
in
mm
18 DN450 150 120 (4)

14.75

 374.7 14.75 374.7 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 101.6 N/A 497 US $11,975.00
150 100 14.75 374.7 15.19 385.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
150
80
14.75
374.7
15.62
396.7
 3/4 F
8
 12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
497
 US $11,975.00
150 60 14.75 374.7 16.00 406.4 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
150
40
14.75
374.7
16.38
416.1
 3/4 F
8
 12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
497
 US $11,975.00
150 xs 14.75 374.7 16.50 419.1 3/4 F 8
12 1/2
317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
150 30 14.75 374.7 16.62 422.1 3/4 F 8

12 1/2

 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
150 std 14.75 374.7 16.75 425.5 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
150 20 14.75 374.7 16.88 428.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
150 10/10s/5 14.75 374.7 17.12 434.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 497 US $11,975.00
300 120 (4)

14.75

 374.7 14.75 374.7
3/4 F
8 12 1/2 317.5 20 11/16 525.5 4 101.6 N/A 656 US $13,113.00
300 100 14.75 374.7 15.19 385.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
300
80
14.75
374.7
15.62
396.7
3/4 F
8
12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
656
 US $13,113.00
300 60 14.75 374.7 16.00 406.4 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
300
40
14.75
374.7
16.38
416.1
 3/4 F
8
 12 1/2
317.5
20 11/16
525.5
4 5/8
117.5
N/A
656
 US $13,113.00
300 xs 14.75 374.7 16.50 419.1 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
300 30 14.75 374.7 16.62 422.1 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
300 std 14.75 374.7 16.75 425.5 3/4 F 8
12 1/2
317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
300 20 14.75 374.7 16.88 428.8 3/4 F 8

12 1/2

 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
  300 10/10s/5 14.75 374.7 17.12 434.8 3/4 F 8 12 1/2 317.5 20 11/16 525.5 4 5/8 117.5 N/A 656 US $13,113.00
20 DN500 150 100 (4) 16.94 430.3 16.94 430.3
3/4 F
10 12 1/2 317.5 20 11/16 525.5 3 3/4 95.3 N/A 640 US $13,602.00
150
80
16.94
430.3
17.44
443.0
 3/4 F
10
 12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
640
 US $13,602.00
150 60 16.94 430.3 17.88 454.2 3/4 F 10
12 1/2
317.5 20 11/16 525.5 4 3/8 111.1 N/A 640 US $13,602.00
150
40
16.94
430.3
18.31
465.1
 3/4 F
10
12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
640
 US $13,602.00
150 30/xs 16.94 430.3 18.50 469.9 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 640 US $13,602.00
150 20/std 16.94 430.3 18.75 476.3 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 640 US $13,602.00
150 10/10s/5 16.94 430.3 19.06 484.1 3/4 F 10
12 1/2
317.5 20 11/16 525.5 4 3/8 111.1 N/A 640 US $13,602.00
300 100 (4) 16.94 430.3 16.94 430.3 3/4 F 10 12 1/2 317.5 20 11/16 525.5 3 3/4 95.3 N/A 870 US $14,858.00
300
80
16.94
430.3
17.44
443.0
 3/4 F
10
12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
870
 US $14,858.00
300 60 16.94 430.3 17.88 454.2 3/4 F 10

12 1/2

 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870 US $14,858.00
300
40
16.94
430.3
18.31
465.1
 3/4 F
10
 12 1/2
317.5
20 11/16
525.5
4 3/8
111.1
N/A
870
 US $14,858.00
300 30/xs 16.94 430.3 18.50 469.9 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870 US $14,858.00
300 20/std 16.94 430.3 18.75 476.3 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870 US $14,858.00
  300 10/10s/5 16.94 430.3 19.06 484.1 3/4 F 10 12 1/2 317.5 20 11/16 525.5 4 3/8 111.1 N/A 870 US $14,858.00
24 DN600 150 120 (4) 19.88 505.0 19.88 505.0 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 101.6 N/A 932 US $16,145.00
150 100 19.88 505.0 20.44 519.2 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932 US $16,145.00
150
80
19.88
505.0
21.06
534.9
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
932
 US $16,145.00
150 60 19.88 505.0 21.56 547.6 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932 US $16,145.00
150
40
19.88
505.0
22.12
561.8
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
932
 US $16,145.00
150 30 19.88 505.0 22.38 568.5 3/4 F 12

12 3/4

 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932 US $16,145.00
150 xs 19.88 505.0 22.50 571.5 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932 US $16,145.00
150 20/std 19.88 505.0 22.75 577.9 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932 US $16,145.00
150 10/5 19.88 505.0 23.06 585.7 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 932 US $16,145.00
300 120 (4) 19.88 505.0 19.88 505.0 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 101.6 N/A 1255 US $18,197.00
300 100 19.88 505.0 20.44 519.2 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255 US $18,197.00
300
80
19.88
505.0
21.06
534.9
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
1255
 US $18,197.00
300 60 19.88 505.0 21.56 547.6 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255 US $18,197.00
300
40
19.88
505.0
22.12
561.8
 3/4 F
12
12 3/4
323.9
20 15/16
531.81
4 3/4
120.7
N/A
1255
 US $18,197.00
300 30 19.88 505.0 22.38 568.5 3/4 F 12

12 3/4

 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255 US $18,197.00
300 xs 19.88 505.0 22.50 571.5 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255 US $18,197.00
300 20/std 19.88 505.0 22.75 577.9 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255 US $18,197.00
  300 10/5 19.88 505.0 23.06 585.7 3/4 F 12 12 3/4 323.9 20 15/16 531.81 4 3/4 120.7 N/A 1255 US $18,197.00

* Seal-to-pipe clearance: approximately 1/2". Clearance may be slightly smaller on plugs that accommodate more than one schedule size.  Replacement washers:  required on all schedule sizes except for the smallest ID for each size pipe.

** External O-ring:  included on 10" and 12" seals.

Other flange class ratings and pipe schedules available upon request.  Call for pricing.

Ordering information needed:  flange size and rating, pipe ID or schedule, and test pressure.

Maximum Test Pressures

ANSI

Maximum psig
Flange Class
psi
bar
150
450
30.9
300
1125
77.2
600 & up
1125*
77.2*
*Consult Factory
Pipe Size
Crowfoot Wrench or Socket Size
3/4" to 1"
9/16" Crowfoot Wrench
1 1/4" to 2"
15/16" Crowfoot Wrench
2 1/2" to 4"
2" Deep Impact Socket
6" to 8"
3 1/8" Deep Impact Socket
10" to 24"
1 5/8" Deep Impact Socket

*Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold back can only be estimated. Pressures are influenced by many factors including fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal, and temperature. Plugs should always be inserted fully into pipeline and should be mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system.  NEVER use a mechanical plug when its failure would cause injury.

Specifications subject to change without notice

Price subject to change without notice

Petersen Terms & Conditions Apply