Petersen Products Company, pipe plug, plugs, packers, hot tapping

Multi-FlexT Heavy Duty Pipe Plugs Standard and custom plugs are available for almost any application. Configurations are available for high and low pressure, high and low temperature, and almost any chemical and fluid environment.	Multi-FlexT Medium Duty Pipe Plugs Similar to the 124-Series but have a lower pressure rating and a shorter inflated contact length, all pipeline sizes.	Multi-FlexT Hot Tap Insertion Plugs Similar to the 124-Series but with a higher pressure rating and configured for hot tap insertion into a pressurized pipeline, all pipeline sizes.	Multi-FlexT Line Stop Plugs Is used for higher pressure pipe plugging with installation possible through a manhole, a live hot tap or otherwise inaccessible pipelines. This flexible plug will conform to almost any pipe configuration.	Hot Tap Pipe Plugging Systems Typically used for plugging of pipelines through a hot tap in the side of the pipe or through a valve on the end of a pipe.
114 & 115 Series Low Cost Multi-Flex Pipe Plugs W&W/O By-Pass	124 & 125 Series Multi-Flex Pipe Plugs W&W/O By-Pass	128 Series Multi-Flex Hot Tap Insertion Plugs	129 Series Multi-Flex High Pressure Hot Tap Insertion LS Plugs	Hot Tap Pipe Plugging Systems
Rigid By-Pass Pipe Plugs Rigid Core Plugs are generally for higher pressures.	Point Repair Packers May be configured for ambient, hot water or steam cure relining, any size.	Lateral Joint "T" Packers Deflates to small flexible size for easy insertion into laterals.	Gas Plugs The Low Pressure Gas Plugs consists of an inner bladder made of a high quality nitrile encased in a 100% Polyester fabric cover.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.
126 Series Multi-Flex Rigid By-Pass Pipe Plugs	118 & 119 Series Multi-Flex Packers W&W/O By-Pass	116 Series Multi-Flex Lateral Joint "T" Packers	154 Series Gas Plugs	130-1 Series Stack Test Style Rubber Test Plugs (Made by Cherne)
Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.	Molded Rubber Test Plugs Multi-size Kevlar reinforced municipal style test plugs, 1.6" to 60" pipelines.	135 Series Pneumatic Pillow Stopper Plugs Often the lowest cost way to plug a larger diameter low pressure pipeline.	Molded Rubber Test Plugs These multi-size plugs are ideal for pressure testing most pipelines from 3 5/8" to 60" diameter.	Plumber Style Molded Rubber Test Plugs Economical plugs for pressure testing pipelines, 0.8" to 12" pipelines.
130-0 Series Plumbers Style Rubber Test Plugs (Made by Cherne)	137 Series Plumber Style Rubber Test Plugs W&W/O By-Pass	134 Series Municipal Kevlar Reinforced Rubber Plugs Without By-Pass	136 Series Municipal Kevlar Reinforced Rubber Plugs With By-Pass	139 Series High Pressure Municipal Pipe Plugs
Long Two-Stage Pipe Plugs Used for blocking and testing laterals and Y joints, 1.75" to 6" pipelines.	High Pressure Molded Rubber Test Plugs Kevlar® reinforced high pressure municipal style plugs, 4" to 24" pipelines.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.
138 Series Long Two-Stage Pipe Plugs	133 Series Oil Resistant Municipal Kevlar Reinforced Rubber Plugs W&W/O By-Pas	135 Series Pneumatic Pillow Stopper Plugs W&W/O By-Pass

Inflatable Pipe Plugs for Almost Any Application Contact us for customized plugs for most size, configuration, chemical, pressure, and temperature requirements. Call 800-926-1926 or 262-692-2416

Inflatable Pipe Plugs for Almost Any Application

Contact us for customized plugs for most size, configuration, chemical, pressure, and temperature requirements.
Call 800-926-1926 or 262-692-2416