130-0 Series Plumber Style Rubber Test Plugs Sizes: 0.75" to 96"
For other inflatable plugs click here Inflation controllers, gauges, hoses, rupture discs, etc. on our accessories page Petersen Inflatable Pipe Plugs Generic Operating Instruction Manual Single-Size Test Plugs The most popular pipe plug for 50 years still gets the job done every time. Designed to test drain, vent, and waste systems, this single-size plug is a must for those involved in the installation and repair of residential, commercial, and industrial piping systems.
The 8", 10", and 12" single-size plugs are ideal for the testing and maintenance of sanitary or storm sewer pipes. These plugs have a removable 3/16" eyebolt and a threaded 1/4" tire inflation valve that can easily be replaced or exchanged with a quick disconnect or any threaded 1/4" fitting. Can be used for head pressure testing or as a back plug for air testing.
|
 |
3/4" through 6" |
|
 |
|
8" through 12" |
|
Multi-Size Test Plugs Based on the single-size test plug design, one multi-size test plug works in up to three different pipe sizes - saving time, money, and shelf/truck space. Easily fits closet bends, sanitary tees, and floor drains. These plugs are ideal for both blocking sewer flow and for use as a back plug in low-pressure air tests. Both the single and multi-size test plugs are made from long-lasting natural rubber with a molded rib design. These plugs are durable, tear-resistant, and works on any type of pipe, including out-of-round pipe. Always block plugs when conducting air tests.
|
 |
Click an Item Number below for the Web Store
**Pipeline Maximum Allowable Back Pressure |
||||||||||||||||||
| Pipe Diameter | Nominal Size | Required Inflation | Head Pressure | Air Pressure | Valve Type | Deflated | Shpg Wt lbs | Item Number | Unit Price Each | |||||||||
| Maximum | Minimum | Length | Dia | |||||||||||||||
| in | mm | in | mm | in | mm | psig | ft | m | psi | bar | in | mm | in | mm | ||||
For Plumbing Applications: equipped with an over-sized ring and 12" chain. The 1/4" tire inflation valve is molded in with a cap. |
||||||||||||||||||
| 2.1 | 53 | 1.25 | 32 | 1.25-2 | 32-50 | 40 | 40 | 12 | 17 | 1.2 | molded | 5.56 | 141 | 1.21 | 31 | 1 | 130-002-M | US $28.20 |
| 3.1 | 80 | 1.9 | 48 | 2-3 | 50-75 | 35 | 40 | 12 | 17 | 1.2 | molded | 5.57 | 141 | 1.78 | 45 | 1 | 130-003-M | US $30.25 |
| 4.1 | 104 | 2.8 | 70 | 3-4 | 75-100 | 40 | 40 | 12 | 17 | 1.2 | molded | 5.18 | 132 | 2.64 | 67 | 1 | 130-004-M | US $37.40 |
| 6.1 | 155 | 3.4 | 87 | 4-6 | 100-150 | 30 | 40 | 12 | 17 | 1.2 | molded | 9.47 | 241 | 3.28 | 83 | 2 | 130-006-M | US $86.60 |
| For Sewer Applications: equipped with a removable tire inflation valve and has an eye bolt for plug installation and removal. | ||||||||||||||||||
| 6.25 | 159 | 3.75 | 92 | 4-6 | 100-150 | 40 | 40 | 12 | 17 | 1.2 | 1/8" | 10.25 | 250 | 3.5 | 85 | 2 | 130-006-MS | US $101.45 |
| 8.25 | 210 | 5.25 | 140 | 6-8 | 150-200 | 35 | 40 | 12 | 17 | 1.2 | 1/4" | 14 | 356 | 4.5 | 114 | 4 | 130-008-MS | US $157.85 |
| 8.25 | 210 | 3.6 | 92 | 4-8 | 100-200 | 30 | 30 | 9.1 | 13 | 0.9 | 1/4" | 20.6 | 469 | 3.5 | 70 | 3 | 130-008-MSM | US $272.00 |
| 12.25 | 311 | 7 | 178 | 8-12 | 200-300 | 20 | 25 | 8 | 11 | .75 | 1/4" | 16 | 406 | 6.75 | 171 | 7 | 130-012-MS | US $369.00 |
| 12.25 | 310 | 5.5 | 140 | 6-12 | 150-300 | 30 | 30 | 9.1 | 13 | 0.9 | 1/4" | 26.25 | 667 | 5.25 | 133 | 5 | 130-012-MSM | US $410.00 |
| 16.25 | 413 | 7.5 | 186 | 8-16 | 200-400 | 30 | 30 | 9.1 | 13 | 0.9 | 1/4" | 29.5 | 750 | 7.25 | 184 | 15 | 130-016-MS | US $502.00 |
| 16.25 | 413 | 7.5 | 186 | 8-16 | 200-400 | 30 | 16.75 | 5.1 | 7.5 | 0.5 | 1/4" | 23 | 585 | 7.25 | 184 | 11 | 130-016-MSS | US $502.00 |
| 18.25 | 464 | 10.75 | 273 | 12-18 | 300-450 | 25 | 25 | 8 | 11 | .75 | 1/4" | 24 | 610 | 10.5 | 267 | 23 | 130-018-MS | US $748.25 |
| 24.25 | 616 | 11 | 275 | 12-24 | 300-600 | 30 | 30 | 9.1 | 13 | 0.9 | 1/4" | 39.5 | 1003 | 10.75 | 273 | 28 | 130-024-MS | US $784.00 |
| 24.25 | 616 | 11 | 279 | 12-24 | 300-600 | 30 | 16.75 | 5.1 | 7.5 | 0.5 | 1/4" | 33 | 839 | 10.75 | 273 | 24 | 130-024-MSS | US $784.00 |
| 30.5 | 775 | 14.5 | 368 | 15-30 | 375-750 | 25 | 25 | 7.6 | 11 | 0.76 | 1/4" & 1/2" | 51 | 1289 | 14 | 356 | 45 | 130-030-MS | US $1,778.00 |
| 40 | 1000 | 19 | 475 | 20-40 | 500-1000 | 22 | 20 | 6.1 | 8.7 | 0.6 | 1/4" & 1/2" | 46.25 | 1175 | 18.5 | 470 | 66 | 130-040-MS | US $2,150.00 |
| 42.5 | 1080 | 22.5 | 570 | 24-42 | 600-1050 | 25 | 20 | 6.1 | 9 | 0.62 | 1/4" & 1/2" | 52 | 1320 | 22 | 560 | 100 | 130-042-MS | US $2,150.00 |
| 50 | 1270 | 20.5 | 521 | 24-48 | 600-1200 | 22 | 3 | 7 | 10 | 0.7 | 1/4" & 1/2" | 74.5 | 1892 | 20 | 508 | 125 | 130-048-MS | US $3,024.00 |
| 60 | 1537 | 38 | 965 | 40-60 | 1000-1500 | 25 | 20 | 6.1 | 8.7 | 0.6 | 1/2" | 73 | 1855 | 37.25 | 946 | 235 | 130-060-MS | US $7,103.00 |
| 60 | 1537 | 26.5 | 675 | 30-60 | 700-1500 | 22 | 23 | 7 | 10 | 0.7 | 1/2" | 102 | 2591 | 26 | 661 | 210 | 130-060-MSM | US $7,073.00 |
| 72 | 1835 | 44 | 1118 | 48-72 | 1200-1800 | 12 | 14 | 4.3 | 6 | 0.41 | 1/2" | 100 | 2540 | 43 | 1092 | 290 | 130-072-MS | US $8,067.00 |
| 96 | 2450 | 540 | 1400 | 54-96 | 1400-2400 | 11 | 14 | 4.3 | 6 | 0.41 | 1/2" | 128 | 3200 | 50 | 1270 | 500 | 130-096-MS | US $11,173.00 |
| Single-Size Test Plugs: the 1/4" tire inflation valve is molded in with a cap and sizes 8" and larger have a removable tire inflation valve. | ||||||||||||||||||
| 1.31 | 33 | .75 | 30 | .75-1.25 | 20-30 | 45 | 40 | 12 | 17 | 1.2 | molded | 3.75 | 95 | .73 | 18 | 1 | 130-0012 | US $34.60 |
| 1.75 | 44 | 1.17 | 30 | 1.25-1.5 | 30-40 | 40 | 30 | 9.1 | 13 | 0.9 | molded | 5.56 | 141 | 1.12 | 33 | 1 | 130-0015 | US $23.55 |
| 2.25 | 57 | 1.9 | 48 | 2 | 50 | 40 | 30 | 9.1 | 13 | 0.9 | molded | 3.34 | 85 | 1.78 | 45 | 1 | 130-002 | US $25.10 |
| 2.75 | 70 | 2.34 | 48 | 2.5 | 65 | 35 | 30 | 9.1 | 13 | 0.9 | molded | 4.5 | 114 | 2.31 | 59 | 1 | 130-0025 | US $28.70 |
| 3.25 | 83 | 2.77 | 70 | 3 | 75 | 35 | 30 | 9.1 | 13 | 0.9 | molded | 5.18 | 132 | 2.64 | 67 | 1 | 130-003 | US $27.15 |
| 4.25 | 108 | 3.41 | 87 | 4 | 100 | 30 | 30 | 9.1 | 13 | 0.9 | molded | 6.41 | 163 | 3.28 | 83 | 1 | 130-004 | US $31.50 |
| 5.25 | 133 | 4.6 | 117 | 5 | 125 | 30 | 30 | 9.1 | 13 | 0.9 | molded | 7.88 | 200 | 4.48 | 114 | 2 | 130-005 | US $59.70 |
| 6.25 | 159 | 5.44 | 138 | 6 | 150 | 30 | 30 | 9.1 | 13 | 0.9 | molded | 9.05 | 230 | 5.32 | 135 | 2 | 130-006 | US $78.65 |
| 8.25 | 210 | 7 | 178 | 8 | 200 | 25 | 40 | 12 | 17 | 1.2 | 1/4" | 10.11 | 257 | 6.75 | 172 | 4 | 130-008 | US $125.05 |
| 10.25 | 260 | 9 | 229 | 10 | 250 | 25 | 40 | 12 | 17 | 1.2 | 1/4" | 11.74 | 298 | 8.7 | 221 | 6 | 130-010 | US $202.95 |
| 12.25 | 311 | 10.5 | 267 | 12 | 300 | 25 | 40 | 12 | 17 | 1.2 | 1/4" | 13.83 | 351 | 10.3 | 262 | 11 | 130-012 | US $256.25 |
**Inflatable Plug Warning: Maximum head pressures that a pipe plug may restrain can only be estimated. Slippage is influenced by many factors including fluid in the pipe, coefficient of pipeline friction, pressure required to inflate the plug, and accuracy of pressure gauges. Generally, a Multi-Flex™ Inflatable Plug inserted fully into pipeline will begin slipping between 50% and 80% of the inflation pressure if it has an inflated pipe contact length of 1 ½ to 2 times the diameter, but even a head of 50% of the inflation pressure may cause slippage with some liquids. The inflation pressure is also subject to temperature change and debris or protrusions in the pipeline that could rupture the plug. The inflation pressure should be monitored and plugs anchored and/or mechanically blocked when slippage may cause property damage or injury. NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system. NEVER use an inflatable plug when its failure would cause injury.
Price subject to change without notice
Petersen Terms & Conditions Apply